 | Ledmark Industries Deluxe Backyard Dome Tent
Brand: Ledmark Model: 28928
Tent, pole and stake bags included. | *39.99 |
 | Ledmark Industries Plastic Mallet with Tent Peg Remover
Brand: Ledmark Part Number: 27921
Features: Heavy duty moulded plastic. Multi purpose mallet. Tent peg remover. | *9.99 |
| Ledmark Industries Plastic Mallet with Tent Peg Remover
Brand: Ledmark Part Number: 27921
Features: Heavy duty moulded plastic. Multi purpose mallet. Tent peg remover. | *9.99 |
 | Ledmark Industries Rubber Mallet, 16 Ounce
Brand: Ledmark Part Number: 27920
Features: Heavy duty rubber head. Wooden handle. Length: 10 1/2". | *8.99 |
| Ledmark Industries Rubber Mallet, 16 Ounce
Brand: Ledmark Part Number: 27920
Features: Heavy duty rubber head. Wooden handle. Length: 10 1/2". | *11.99 |
 | Lee's 0° Stainless Steel Flush Mount Rod Holder - 2"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH527VS
Flush Mount Rod HolderRH-527VS Medium 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *66.26 |
| Lee's 0° Stainless Steel Flush Mount Rod Holder - 2.25"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH532VS
Flush Mount Rod HolderRH-532VS Large 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *82.99 |
 | Lee's 0° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH527VS/XS
Flush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-527VS/XS Medium 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *76.99 |
| Lee's 0° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH532VS/XS
Flush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-532VS/XS Large 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *93.99 |
 | Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder
Brand: LEE'S TACKLE IN Part Number: RH577V
Swivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder. | *136.94 |
| Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder
Brand: LEE'S TACKLE IN Part Number: RH577V
Swivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder. | *157.29 |
 | Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder - Extra Long Tube
Brand: LEE'S TACKLE IN Part Number: RH577XL
Swivel Base Rod HolderRH577XLVertical 0° Extra Long TubeWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder. | *139.99 |
| Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder
Brand: LEE'S TACKLE IN Part Number: RH577V
Swivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder. | *129.99 |
 | Lee's 15° Stainless Steel Flush Mount Rod Holder - 2"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH529HS
Flush Mount Rod HolderRH-529HS Medium 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *79.85 |
| Lee's 15° Stainless Steel Flush Mount Rod Holder - 2.25"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH534HS
Flush Mount Rod HolderRH-534HS Large 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *82.99 |
 | Lee's 15° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH534HS/XS
Flush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-534HS/XS Large 15°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *93.99 |
 | Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder
Brand: LEE'S TACKLE IN Part Number: RH579H
Swivel Base Rod HoldersRH579Half Angle 15°Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder. | *157.29 |
| Lee's 15° Stainless Steel Swivel Base Flush Mount Rod HOlder - Extra Long Tube
Brand: LEE'S TACKLE IN Part Number: RH579XL
Swivel Base Rod HoldersRH579XLHalf Angle 15° Extra Long TubeStainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder. | *139.99 |
| Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length
Brand: LEE'S TACKLE IN Part Number: RH5169H
Swivel Base Rod HoldersRH5169Half Angle 15° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2' OD x 6-1/2' long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder. | *113.99 |
 | Lee's 30° Chrome Flush Mount Rod Holder - 2.25"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH530SS
Flush Mount Rod HolderRH-530 Large 30° Chrome on BrassThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *82.99 |
| Lee's 30° Chrome Flush Mount Rod Holder - 2.25"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH530SS
Flush Mount Rod HolderRH-530 Large 30° Chrome on BrassThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *82.99 |
 | Lee's 30° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH525SS/XS
Flush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-525SS/XS Medium 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *76.99 |
| Lee's 30° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25"" O.D.
Brand: LEE'S TACKLE IN Part Number: RH530SS/XS
Flush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-530SS/XS Large 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. | *93.99 |
 | Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder
Brand: LEE'S TACKLE IN Part Number: RH575XL
Swivel Base Rod HoldersRH575XLStandard Angle 30°Stainless Steel Flush Mount w/ Swivel Base Extra LongThis holder is 4' longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder. | *139.99 |
 | Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder
Brand: Lee's Tackle Part Number: RH575
Swivel Base Rod Holders
RH575
Standard Angle 30°
Stainless Steel Flush Mount w/ Swivel Base
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
| *113.88 |
 | Lee's Clamp-On Antenna Mount - 1.050"" Pipe
Brand: LEE'S TACKLE IN Part Number: AT51001
Clamp-On AccessoryFits: 1.050' PipeMounts: HorizontalFinish: SilverHeavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. | *57.00 |
| Lee's Clamp-On Antenna Mount - 1.315"" Pipe
Brand: LEE'S TACKLE IN Part Number: AT51002
Clamp-On AccessoryFits: 1.315' PipeMounts: HorizontalFinish: SilverHeavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. | *57.00 |
| Lee's Clamp-On Antenna Mount - 1.660"" Pipe
Brand: LEE'S TACKLE IN Part Number: AT51003
Clamp-On AccessoryFits: 1.660' PipeMounts: HorizontalFinish: SilverHeavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. | *57.00 |
| Lee's Clamp-On Antenna Mount - 1.900"" Pipe
Brand: LEE'S TACKLE IN Part Number: AT51004
Clamp-On AccessoryFits: 1.900' PipeMounts: HorizontalFinish: SilverHeavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. | *60.99 |
| Lee's Clamp-On Light Bracket - 1.315"" Pipe
Brand: LEE'S TACKLE IN Part Number: LT52002
Clamp-On AccessoryFits: 1.050' PipeMounts: Horizontal/VerticalFinish: SilverHeavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit. | *71.99 |
| Lee's Clamp-On Light Bracket - 1.660"" Pipe
Brand: LEE'S TACKLE IN Part Number: LT52003
Clamp-On AccessoryFits: 1.660' PipeMounts: Horizontal/VerticalFinish: SilverHeavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit. | *72.99 |
| Lee's Clamp-On Light Bracket - 1.900"" Pipe
Brand: LEE'S TACKLE IN Part Number: LT52004
Clamp-On AccessoryFits: 1.900' PipeMounts: Horizontal/VerticalFinish: SilverHeavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit. | *67.00 |
 | Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5203GL
Aluminum Clamp-on Rod HoldersModel: RA5203GLColor: GoldFits: 1.660' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *100.00 |
| Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.660"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5203GL
Aluminum Clamp-on Rod HoldersModel: RA5203GLColor: GoldFits: 1.660' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *100.00 |
| Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.660"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5203GL
Aluminum Clamp-on Rod HoldersModel: RA5203GLColor: GoldFits: 1.660' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *107.99 |
| Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.900"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5204GL
Aluminum Clamp-on Rod HoldersModel: RA5204GLColor: GoldFits: 1.900' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *100.00 |
| Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.900"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5204GL
Aluminum Clamp-on Rod HoldersModel: RA5204GLColor: GoldFits: 1.900' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *107.99 |
| Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.900"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5204GL
Aluminum Clamp-on Rod HoldersModel: RA5204GLColor: GoldFits: 1.900' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *102.88 |
| Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 2.375"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5205GL
Aluminum Clamp-on Rod HoldersModel: RA5205GLColor: GoldFits: 2.375' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *100.00 |
| Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 2.375"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5205GL
Aluminum Clamp-on Rod HoldersModel: RA5205GLColor: GoldFits: 2.375' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *107.99 |
 | Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.660"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5003GL
Aluminum Clamp-on Rod HoldersModel: RA5003GLColor: GoldFits: 1.660' O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *105.00 |
| Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.660"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5003GL
Aluminum Clamp-on Rod HoldersModel: RA5003GLColor: GoldFits: 1.660' O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *107.99 |
| Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.900"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5004GL
Aluminum Clamp-on Rod HoldersModel: RA5004GLColor: GoldFits: 1.900' O.D. PipeMount: VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *107.99 |
 | Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 2.375"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5005SL
Aluminum Clamp-on Rod HoldersModel: RA5005SLColor: SilverFits: 2.375' O.D. PipeMount: VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *96.00 |
 | Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.050"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5201SL
Aluminum Clamp-on Rod HoldersModel: RA5201SLColor: SilverFits: 1.050' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *95.00 |
| Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 2.375"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5205SL
Aluminum Clamp-on Rod HoldersModel: RA5205SLColor: SilverFits: 2.375' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *94.00 |
| Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.050"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5001SL
Aluminum Clamp-on Rod HoldersModel: RA5001SLColor: SliverFits: 1.050' O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *105.00 |
| Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.050"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5001SL
Aluminum Clamp-on Rod HoldersModel: RA5001SLColor: SliverFits: 1.050' O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *107.99 |
| Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.660" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5003SL
Aluminum Clamp-on Rod HoldersModel: RA5003SLColor: SilverFits: 1.660' O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *95.00 |
| Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.900"" O.D. Pipe
Brand: LEE'S TACKLE IN Part Number: RA5004SL
Aluminum Clamp-on Rod HoldersModel: RA5004SLColor: SilverFits: 1.900' O.D. PipeMount: VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *94.00 |
| LEE'S CLAMP-ON ROD HOLDER GOLD ALUM HORIZONTAL PIPE SIZE #1
Brand: LEE'S TACKLE IN Part Number: RA5201GL
Aluminum Clamp-on Rod HoldersModel: RA5201GLColor: GoldFits: 1.050' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *104.13 |
| LEE'S CLAMP-ON ROD HOLDER GOLD ALUM HORIZONTAL PIPE SIZE #2
Brand: LEE'S TACKLE IN Part Number: RA5202GL
Aluminum Clamp-on Rod HoldersModel: RA5202GLColor: GoldFits: 1.315' O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *107.99 |
| LEE'S CLAMP-ON ROD HOLDER GOLD ALUMINUM VERTICAL PIPE SIZE #
Brand: LEE'S TACKLE IN Part Number: RA5002GL
Aluminum Clamp-on Rod HoldersModel: RA5002GLColor: GoldFits: 1.315' O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *107.99 |
| LEE'S CLAMP-ON ROD HOLDER SLVR ALUM HORIZONTAL PIPE SIZE #1
Brand: LEE'S TACKLE IN Part Number: RA5201SL
Aluminum Clamp-on Rod Holders
Model: RA5201SL
Color: Silver
Fits: 1.050" O.D. Pipe
Mount: Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
| *95.00 |
| LEE'S CLAMP-ON ROD HOLDER SLVR ALUMINUM VERTICAL PIPE SIZE #
Brand: LEE'S TACKLE IN Part Number: RA5002SL
Aluminum Clamp-on Rod HoldersModel: RA5002SLColor: SilverFits: 1.315' O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *95.13 |
| LEE'S CLAMP-ON ROD HOLDER SLVR ALUMINUM VERTICAL PIPE SIZE #5
Brand: LEE'S TACKLE IN Part Number: RA5005SL
Aluminum Clamp-on Rod Holders
Model: RA5005SL
Color: Silver
Fits: 2.375" O.D. Pipe
Mount: Vertial
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. | *96.00 |
 | Lee's Rod and Reel Hanger Set - Penn International 130, 130H, 130S - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1130
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 130, 130H, 130SConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
 | Lee's Rod and Reel Hanger Set - Penn International 130, 130H, 130S - Bright Gold
Brand: Lee's Tackle Part Number: MC0075-1130
Rod Storage Systems
Rod and Reel Hanger Set
Anodized Finish: Gold
For: Penn International 130, 130H, 130S
Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
| *33.03 |
| Lee's Rod and Reel Hanger Set - Penn International 130ST - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1131
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 130STConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Penn International 16S - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1016
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 16SConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Penn International 20 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1020
Rod Storage Systems
Rod and Reel Hanger Set
Anodized Finish: Gold
For: Penn International 20
Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
| *43.73 |
| Lee's Rod and Reel Hanger Set - Penn International 20T - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1022
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 20TConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Penn International 30 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1030
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 30Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *46.99 |
| Lee's Rod and Reel Hanger Set - Penn International 30T, 30S - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1032
Rod Storage Systems
Rod and Reel Hanger Set
Anodized Finish: Gold
For: Penn International 30T, 30S
Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
| *43.73 |
| Lee's Rod and Reel Hanger Set - Penn International 30VSW, 30TW, 30SW
Part Number: MC0075-1033
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 30VSW, 30TW, 30SWConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *39.71 |
| Lee's Rod and Reel Hanger Set - Penn International 50 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1050
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 50Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Penn International 50T, 50S - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1052
Rod Storage Systems
Rod and Reel Hanger Set
Anodized Finish: Gold
For: Penn International 50T, 50S
Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
| *43.73 |
| Lee's Rod and Reel Hanger Set - Penn International 50VSW, 50TW, 50SW - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1053
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 50VSW, 50TW, 50SWConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *38.62 |
| Lee's Rod and Reel Hanger Set - Penn International 50W - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1051
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 50WConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Penn International 70VS - Bright Gold
Part Number: MC0075-1071
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 70VSConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *39.71 |
| Lee's Rod and Reel Hanger Set - Penn International 70VS - Bright Gold
Brand: Lee's Tackle Part Number: MC0075-1071
Rod Storage Systems
Rod and Reel Hanger Set
Anodized Finish: Gold
For: Penn International 70VS
Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
| *30.59 |
| Lee's Rod and Reel Hanger Set - Penn International 80 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1080
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 80Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *50.81 |
| Lee's Rod and Reel Hanger Set - Penn International 80T, 80ST, 80TS - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1082
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 80T,80ST, 80TSConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Penn International 80TW, 80SW, 80STW - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1083
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 80TW,80SW, 80STWConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Penn International 80W - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-1081
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 80WConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Shimano Tiagra 16 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-3016
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 16Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Shimano Tiagra 16 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-3016
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 16Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *41.99 |
| Lee's Rod and Reel Hanger Set - Shimano Tiagra 30 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-3030
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 30Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *40.00 |
| Lee's Rod and Reel Hanger Set - Shimano Tiagra 30 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-3030
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 30Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *41.99 |
| Lee's Rod and Reel Hanger Set - Shimano Tiagra 50 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-3050
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 50Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *31.54 |
| Lee's Rod and Reel Hanger Set - Shimano Tiagra 50 - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-3050
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 50Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *41.99 |
| Lee's Rod and Reel Hanger Set - Shimano Tiagra 50W - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-3051
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 50WConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *39.99 |
| Lee's Rod and Reel Hanger Set - Shimano TLD50 LRS - Bright Gold
Brand: LEE'S TACKLE IN Part Number: MC0075-4026
Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano TLD50 LRS (2 Speed)Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead. | *32.54 |
| LEE'S ROD/REEL HANGER SHIMANO TIAGRA 20 BRIGHT GOLD
Brand: LEE'S TACKLE IN Part Number: MC0075-3020
Rod Storage Systems
Rod and Reel Hanger Set
Anodized Finish: Gold
For: Shimano Tiagra 20
Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
| *35.28 |
 | Lee's Stainless Steel Backing Plate For 30° Heavy Rod Holders
Brand: LEE'S TACKLE IN Part Number: RH5930
RH5930Stainless Steel Backing Plate for 30° Heavy Rod Holders | *30.99 |
 | Lee's Stainless Steel Backing Plate For 30° Medium Rod Holders
Brand: LEE'S TACKLE IN Part Number: RH5931
RH5931Stainless Steel Backing Plate for 30° Medium Rod Holders | *22.00 |
 | Lee's Stainless Steel Heavy Duty Bulkhead Mount w/ Swivel Base
Brand: LEE'S TACKLE IN Part Number: RH570
Swivel Base Rod HoldersRH570Stainless Steel Side Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder. | *149.99 |
 | Lee's Stainless Steel Heavy Duty Bulkhead Mount w/ Swivel Base - Extra Long
Brand: LEE'S TACKLE IN Part Number: RH570XL
Swivel Base Rod HoldersRH570XLStainless Steel Side Mount w/ Swivel Base Extra LongThis holder is 4' longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder. | *155.00 |
 | Lee's Vinyl Rubber Insert For RH525
Brand: LEE'S TACKLE IN Part Number: RH526
RH526Vinyl Rubber Insert for RH525 | *8.50 |
| Lee's Vinyl Rubber Insert For RH525
Brand: LEE'S TACKLE IN Part Number: RH526
RH526Vinyl Rubber Insert for RH525 | *12.99 |
 | Lee's Vinyl Rubber Insert For RH525
Brand: Lee's Tackle Part Number: RH526
RH526
Vinyl Rubber Insert for RH525
| *6.24 |
 | Leg Sect - TL4/4XT/4OUTF
Brand: Eureka Part Number: 2662090
Replacement leg section for any 4-person Timberline.Manufacturer: Eureka!. Manufacturer#: 620904. Approximate Shipping Weight (lbs): 0.6. | *16.69 |
| Leg Sect- TL4/4XT/4OUTF
Brand: Eureka Part Number: 2662090
Leg Section - Timberline 4/4XT/4OutfitterManufacture ID: 2662090Replacement leg section for any 4-person Timberline.Warranty: Warranted against manufacturer defects. | *17.36 |
| Leg Section
Brand: Eureka! Part Number: 2662090
Replacement leg section for any 4-person Timberline. | *20.56 |
| Leg Section Leg Sect - TL 2/2XT/2OUTF
Brand: Eureka Part Number: 2662089
Replacement leg section for any 2-person Timberline. | *17.95 |
| Leg Section [Misc.]
Brand: Eureka | *21.77 |
| Leg Section [Misc.]
Brand: Eureka | *22.66 |
 | LEHIGH Ground Stake, 11", for rope up to 5/8" diameter
Brand: LEHIGH GROUP Part Number: GS11
* General use ground stakes | *3.60 |
| LEHIGH Ground Stake, 16", for rope to 7/8" diameter
Brand: LEHIGH GROUP Part Number: GS16
* General use ground stakes | *5.96 |
 | Lemon Side Panel
Brand: Logo Chairs Part Number: 47-116
Encloses canopy tent for privacy and protection from bad weather or wind. Fastens to tailgate tent with Velcro. | *24.30 |