AC Power Inverter with High Surge Capability, 3-Stage Charger

With filtered modified sine wave output, Freedom Mrine inverter/chargers run virtually anything on your boat, from office equipment to household appliances and electronics. Temperature controlled multistage charging ensures that your batteries are recharged safely and efficiently. Its integrated transfer switch allows for automatic change-over between shorepower and inverter.

For inverter/charger control and basic system monitoring use the Freedon Basic Remote. For advanced battery monitoring and remote control, Freedom Marine inverter/chargers can be paired with optional Link instrumentation.

Product Features

MSW AC power inverter with high surge capability
Automatic 3-stage battery charger
Temperature compensation with equalization stage provides optimal charging of deep cycle batteries
Built-in transfer switch automatically transfers between inverter power and incoming AC power
Multiple battery bank charging from the built in 15 A echo~charge
Power sharing prevents source AC input circuit breaker from tripping
Customized settings can be programmed with the Freedom Basic Remote or Link panels
Aluminum chassis ideal for marine environment
Includes battery temperature sensor
30 month warranty
Protection Features

Over voltage and under voltage protection
Over-temperature protection
Overload protection
Short circuit protection

Specifications:

Output power (continuous) 2000 W
Surge power (AC amps) 50 A
Output frequency regulation 60 Hz, quartz regulated
Inverter voltage regulation 120 V +/-5% true RMS
Output wave form Modified sine wave
Efficiency (full load) 85%
Peak efficiency 93%
No load current draw (idle mode) 0.12 A
AC transfer switch 30 A
Electrical Specifications - Charger
Charge rate 100 A DC
AC input voltage range 90

AC Power Inverter with High Surge Capability, 3-Stage Charger

With filtered modified sine wave output, Freedom Marine inverter/chargers run virtually anything on your boat, from office equipment to household appliances and electronics. Temperature controlled multistage charging ensures that your batteries are recharged safely and efficiently. Its integrated transfer switch allows for automatic change-over between shorepower and inverter.

For inverter/charger control and basic system minitoring system Remote. For advanced battery monitoring and remote control, Freedom Marine inverter/chargers can be paired with optional Link instrumentation.

Product Features

MSW AC power inverter with high surge capability
Automatic 3-stage battery charger
Temperature compensation with equalization stage provides optimal charging of deep cycle batteries
Built-in transfer switch automatically transfers between inverter power and incoming AC power
Multiple battery bank charging from the built in 15 A echo~charge
Power sharing prevents source AC input circuit breaker from tripping
Customized settings can be programmed with the Freedom Basic Remote Link panels
Aluminum chassis ideal for marine environment
Includes battery temperature sensor
30 month warranty
Protection Features

Over voltage and under voltage protection
Over-temperature protection
Overload protection
Short circuit protection

Specifications:

Output power (continuous) 2500 W
Surge power (AC amps) 62.5 A
Output frequency regulation 60 Hz, quartz regulated
Inverter voltage regulation 120 V +/-5% true RMS
Output wave form Modified sine wave
Efficiency (full load) 87%
Peak efficiency 93%
No load current draw (idle mode) 0.12 A
AC transfer switch 30 A
Electrical Specifications - Charger
Charge rate 130 A DC
AC input voltage range 90 − 130 VAC

AC Power Inverter with High Surge Capability, 3-Stage Charger

With filtered modified sine wave output, Freedom Marine inverter/chargers run virtually anything on your boat, from office equipment to household appliances and electronics. Temperature controlled multistage charging ensures that your batteries are recharged safely and efficiently. Its integrated transfer switch allows for automatic change-over between shorepower and inverter.

For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom Marine inverter/chargers can be paired with optional Link instrumentation.

Product Features

MSW AC power inverter with high surge capability
Automatic 3-stage battery charger
Temperature compensation with equalization stage provides optimal charging of deep cycle batteries
Built-in transfer switch automatically transfers between inverter power and incoming AC power
Multiple battery bank charging from the built in 15 A echo~charge
Power sharing prevents source AC input circuit breaker from tripping
Customized settings can be programmed with the Fre edom Basic Remote or Link panels
Aluminum chassis ideal for marine environment
Includes battery temperature sensor
30 month warranty
Protection Features

Over voltage and under voltage protection
Over-temperature protection
Overload protection
Short circuit protection

Specifications:

Output power (continuous) 3000 W
Surge power (AC amps) 75 A
Output frequency regulation 60 Hz, quartz regulated
Inverter voltage regulation 120 V +/-5% true RMS
Output wave form Modified sine wave
Efficiency (full load) 86%
Peak efficiency 93%
No load current draw (idle mode) 0.12 A
AC transfer switch 30 A
Electrical Specifications - Charger
Charge rate 140 A DC
AC input voltage range 90

Single Bank Monitor

Provides Battery Status Information At-A-Glance

The Link 10 (part#84-2016-01) uses sophisticated microprocessor technology to provide complete battery status information for one battery bank. Simple and easy-to-use multicolour display show volts, amps h ours consumed, and operating time remaining. The Link 10 and 20 allow you to select Automatic, Sleep and Scanning modes an automatically calculate and dislay charging efficiency. By adding an optional prescaler, Link 10 can monitor single battery banks up to 500 volts.

Product Features

Digital Numeric Display - LED display shows numerical of volts, amps, amp-hours and time remaining
Easy to read multi-color LED bar graph
Splash proof panels allow for outdoor mounting and hands free operation
Displays key historical battery information such as charge efficiency, deepest discharge, and average discharge
Compatible with 12 and 24 volt DC systems
Works with any battery type
Includes DC shunt (part#84-2010-00)
Low battery alarm contacts
One year warranty

Specifications

Voltage Measurement
(standard model auto range) 0-19.95 VDC (0.05 V resolution)
20.0-50.0 VDC (0.1 V resolution)
Voltage Measurement
(optional prescalers) 0-100 V (used with standard models)
0-500 V (used with standard models)
Amperage Measurement Low range +/- 0-40 A (0.1 A resolution)  High range +/- 500 A (1.0 A resolution)
Amp-hour Measurement Low range +/- 0-199 Ah (0.1 hour resolution) High range +/- 200-1, 999 Ah (1 hour resolution)
Time Remaining Measurement Low range 0-199.9 hours (0.1 hour resolution) High range 0-255 hours (1 hour resolution)
Power Requirements 9.5-40 VDC (DC power supply voltage)
Power Consumption 50-225 mA (display auto dims with ambient light) 28 mA (sleep mode - bar graph display only)
Shunt Type 500 A/50 mV (included)
Accuracy Voltage +/- 0.6% of

Integrated Battery Monitor and Inverter/Charger Control in a Single Panel

The Link 1000 is an instrumentation and control panel designed for use with the Xantrex Freedom series inverter/charger and a single battery bank. It reads like a fuel gauge for batteries - displaying battery state-of-charge at a glance. Inverter and charger functions are independently controlled with the touch of a keypad.

Product Features

Digital numeric display automatically compensates for ambient conditions and selectively shows: DC volts and amps, battery amp hours consumed, time remaining to full discharge, fault conditions
Multi-colored LED displays: approximate battery state of charge, AC input
Push button control of power sharing, equalizing, battery set-up, independent inverter and charger on/off controls
Second sense lead for voltage sensing on an additional battery bank
Power Share and Idle Mode are easily set from the panel
Compatible with 12 or 24 volt sytems
Includes precision DC shunt
Easy to install
One year warranty
Programmable Advanced Functions

User programmable adjustments of the Freedom Inverter/Charger directly from the front panel
Can be set for four different battery types including wet, gel and AGM
Data is used to recall key information about the battery bank: charge efficiency, deepest discharge, average discharge, and other data

 Specifications


Voltage Measurement
(standard model auto range) 0-19.90 VDC (0.05 V resolution) 0.0-50.0 VDC (0.1 V resolution)
Amperage Measurement
(+/- 500 amps) Low range 0-40 A +/- 0.1 A resolution High range 40-500 A +/- 1.0 A resolution
Amp-hour Measurement Low range +/- 0-199.9 Ah (0.1 hour resolution) High range +/- 200-1, 999 Ah (1 hour resolution)
Time Remaining Measurement Low range 0-199.9 hours (0.1 hour resolution) High range 0-255 hours (1 hour resolution)
Power Requir

Dual Battery Bank Monitor

Provides Battery Status Information At-A-Glance

The Link 20 (part#84-2020-00) uses sophisticated microprocessor technology to provide complete battery status information for two battery banks, respectively. Simple and easy-to-use multicolor displays show volts, amps, amp hours consumed, and operating time remaining. The Link 20 allow you to select Automatic, Sleep and Scanning modes and automatically calculate and display charging efficiency. The Link 20 can monitor a house bank and starting bank or two house bank batteries at the same time.

Product Features

Digital Numeric Display - LED display shows numeric read out of volts, amps, amp-hours and time remaining
Easy to read multi-color LED bar graph
Splash proof panels allow for outdoor mounting and hands free operation
Displays key historical battery information such as charge efficiency, deepest discharge, and average discharge
Compatible with 12 and 24 volt DC systems
Works with any battery type
Includes DC shunt (84-2011-00)
Low battery alarm contacts
One year warranty

Specifications

Voltage Measurement
(standard model auto range) 0-19.95 VDC (0.05 V resolution) 20.0-50.0 VDC (0.1 V resolution)
Amperage Measurement Low range +/- 0-40 A (0.1 A resolution) High range +/- 500 A (1.0 A resolution)
Amp-hour Measurement Low range +/- 0-199 Ah (0.1h hour resolution) High range +/- 200-1, 999 Ah (1 hour resolution)
Time Remaining Measurement Low range 0-199.9 hours (0.1 hour resolution) High range 0-255 hours (1 hour resolution)
Power Requirements 9.5-40 VDC (DC power supply voltage)
Power Consumption 50-225 mA (display auto dims with ambient light) 28 mA (sleep mode - bar graph display only)
Shunt Type 500 A/50 mV (dual included)
Accuracy Voltage +/- 0.6% of reading + 1 least count of resolution  Amperage +/- 0.8% of reading + 1 least count of resolution

Integrated Battery Monitor and Inverter/Charger Control

The Link 2000 instrumentation and control panel is designed for use with the Xantrex Freedom series inverter/charger and a dual battery bank. It displays critical DC electrical information for 12 and 24V VDC systems and allows for advanced setup of critical inverter and charger functions. An easy to read LCD display provides a digital readout of system data.

The Link 2000R offers the features of the Link 2000 plus a three-stage advanced alternator regulator and alternator output monitoring. (For use only with 12 or 24 volt "P" Field type alternators.)

Product Features

Digital display of volts, amps, amp-hours consumed and time remaining until full discharge
Easy to read backlit LCD display
AC input and charging status display
Flush mount design
Includes DC shunt
Easy to install
One year warranty
Programmable Advanced Functions

User programmable adjustments of the Freedom Inverter/Charger directly from the front panel
Can be set for four different battery types including wet, gel and AGM
Data is used to recall key information about the battery bank: charge efficiency, deepest discharge, average discharge, and other data

Specifications

Voltage Measurement
(standard model auto range) 8.5-50 VDC (0.05 V resolution)
Amperage Measurement (+/- 500 amps) Low range 0-40A +/- 0.1 A resolution High range 40-500 A +/- 1.0 A resolution
Amp-hour Measurement Low range +/- 0-199.9 Ah (0.1 hour resolution) High range +/- 200-1, 999 Ah (1 hour resolution)
Time Remaining Measurement Low range 0-199.9 hours (0.1 hour resolution) High range 0-255 hours (1 hour resolution)
Power Requirements 9-40 VDC (DC power supply volta voltage
Power Consumption 28 mA (adjustable back-light adds 1-18 mA)
Shunt Type 500 A/50 mV (included)
Accuracy Voltage +/- 0.6% of reading + 1 least count of resolution Am

Integrated Battery Monitor and Inverter/Charger Control

The Link 2000 instrumentation and control panel is designed for use with the Xantrex Freedom series inverter/charger and a dual battery bank. It displays critical DC electrical information for 12 and 24 V 24 VDC systems and allows for advanced setup of critical inverter and charger functions. An easy to read LCD display provides a digital readout of system data.

Product Features

Digital display of volts, amps, amp-hours consumed and time remaining until full discharge
Easy to read backlit LCD display
AC input and charging status display
Flush mount design
Includes DC shunt
Easy to install
One year warranty
Programmable Advanced Functions

User programmable adjustments of the Freedom Inverter/Charger directly from the front panel
Can be set for four different battery types including wet, gel and AGM
Data is used to recall key information about the battery bank: charge efficiency, deepest discharge, average discharge, and other data

Specifications

Voltage Measurement
(standard model auto range): 8.5-50 VDC (0.05 V resolution)
Amperage Measurement
(+/- 500 amps): Low range 0-40 A +/- 0.1 A resolution High range 40-500 A +/-1.0 A resolution
Amp-hour Measurement Low range +/- 0-199.9 Ah (0.1 hour resolution) High range +/- 200-1, 999 Ah (1 hour resolution)
Time Remaining Measurement Low range 0-199.9 hours (0.1 hour resolution) High range 0-255 hours (1 hour resolution)
Power Requirements 9-40 VDC (DC power supply volta ge)
Power Consumption 28 mA (adjustable back-light add s 1-18 mA)
Shunt Type 500 A/50 mV (included)
Accuracy Voltage +/- 0.6% of reading + 1 least count of resolution Amperage +/- 0.8% of reading + 1 least count of resolution Amp- hours Ah Error - time measurement x current error

General Specifications
Dimensions (H x W x D) 3.72 x 5.75 x 1.25" (9 (9

Multiple Battery Bank Charging

PathMaker is a battery combiner that automatically connects 2 or 3 battery banks for simultaneous charging and isolates them during discharge. A toggle switch allows the user to manually parallel battery banks for emergency starting power. For use with 12 or 24-volt systems, PathMaker has user adjustable settings for connect and disconnect.

Product Features

Automatic, high current switch for simultaneous two to three bank charging
Connects batteries together when the voltage is suffcently high and disconnects when voltage drops during discharge
No voltage drop in charging voltage
Manual connect feature for emergency starts
Compatible with all charging sources
Convenient front panel LED status indicators
User-selectable connect and disconnect voltages
One year warranty
Options

Four models available
Available in two or three battery bank versions with models at 100 and 250 Amps
Optional Remote Control - indicates Off, Auto and Combine

Specifications


Current ratings 100 A: 100 A continuous, 400 A peak 250 A: 250 A continuous, 1200 A peak
Voltage range 7-33 V (24 V assumed if > 18.0 V)
Low voltage disconnect range 12.8-13.2 V (x2 for 24 V)
Connect voltage range 13.1-13.5 V (x2 for 24 V)
High voltage disconnect range 14-16 V (x2 for 24V)
Idle power consumed 0.2-0.35 W at 12 V, 0.4-0.7 W at 24 V
Connected power
100 A/2 Bank 5.4 W @ 12 V, 5.8 W @ 24 V
100 A/3 Bank 10.4 W @ 12 V, 10.8 W @ 24 V
250 A/3 Bank 3.46 W @ 12 V, 5.43 W @ 24 V
250 A/2 Bank 2.24 W @ 12 V, 3.69 W @ 24 V
Indicator lights Disabled: Yellow Connected: Green High Voltage Disconnect: Red Wait for Reconnect: Flashing Red
External control User supplied momentary on/off switch
Operating temperature range -28.9 C to 48.9 C (1 00 A) -40 C to 85 C (250 A)
Remote panel (optional)
Flush mount, splashproof front, 25'

Multiple Battery Bank Charging

PathMaker is a battery combiner that automatically connects 2 or 3 battery banks for simultaneous charging and isolates them during discharge. A toggle switch allows the user to manually parallel battery banks for emergency starting power. For use with 12 or 24-volt systems, PathMaker has user adjustable settings for connect and disconnect.

Product Features

Automatic, high current switch for simultaneous two to three bank charging
Connects batteries together when the voltage is sufficiently high and disconnects when voltage drops during discharge
No voltage drop in charging voltage
Manual connect feature for emergency starts
Compatible with all charging sources
Convenient front panel LED status indicators
User-selectable connect and disconnect voltages
One year warranty
Options

Four models available
Available in two or three battery bank versions wi with models at 100 and 250 Amps
Optional Remote Control - indicates Off, Auto and Combine

Specifications


Current ratings 100 A: 100 A continuous, 400 A peak 250 A: 250 A continuous, 1200 A peak
Voltage range 7-33 V (24 V assumed if > 18.0 V)
Low voltage disconnect range 12.8-13.2 V (x2 for 24 V)
Connect voltage range 13.1-13.5 V (x2 for 24 V)
High voltage disconnect range 14-16 V (x2 for 24V)
Idle power consumed 0.2-0.35 W at 12 V, 0.4-0.7 W at 24 V
Connected power
100 A/2 Bank 5.4 W @ 12 V, 5.8 W @ 24 V
100 A/3 Bank 10.4 W @ 12 V, 10.8 W @ 24 V
250 A/3 Bank 3.46 W @ 12 V, 5.43 W @ 24 V
250 A/2 Bank 2.24 W @ 12 V, 3.69 W @ 24 V
Indicator lights Disabled: Yellow Connected: Green High Voltage Disconnect: Red Wait for Reconnect: Flashing Red
External control User supplied momentary on/off switch
Operating temperature range -28.9 C to 48.9 C (100 A) -40 C to 85 C (250 A)
Remote panel (optional)
Flush mount, splashproof front,

Multiple Battery Bank Charging

PathMaker is a battery combiner that automatically connects 2 or 3 battery banks for simultaneous charging and isolates them during discharge. A toggle switch allows the user to manually parallel battery banks for emergency starting power. For use with 12 or 24-volt systems, PathMaker has user adjustable settings for connect and disconnect.

Product Features

Automatic, high current switch for simultaneous two,three bank charging
Connects batteries together when the voltage is su sufficiently high and disconnects when voltage drops during discharge
No voltage drop in charging voltage
Manual connect feature for emergency starts
Compatible with all charging sources
Convenient front panel LED status indicators
User-selectable connect and disconnect voltages
One year warranty
Options

Four models available
Available in two or three battery bank versions with models at 100 and 250 Amps
Optional Remote Control - indicates Off, Auto and Combine

Specifications


Current ratings 100 A: 100 A continuous, 400 A peak 250 A: 250 A continuous, 1200 A peak
Voltage range 7-33 V (24 V assumed if > 18.0 V)
Low voltage disconnect range 12.8-13.2 V (x2 for 24 V)
Connect voltage range 13.1-13.5 V (x2 for 24 V)
High voltage disconnect range 14-16 V (x2 for 24V)
Idle power consumed 0.2-0.35 W at 12 V, 0.4-0.7 W at 24 V
Connected power
100 A/2 Bank 5.4 W @ 12 V, 5.8 W @ 24 V
100 A/3 Bank 10.4 W @ 12 V, 10.8 W @ 24 V
250 A/3 Bank 3.46 W @ 12 V, 5.43 W @ 24 V
250 A/2 Bank 2.24 W @ 12 V, 3.69 W @ 24 V
Indicator lights Disabled: Yellow Connected: Green High Voltage Disconnect: Red Wait for Reconnect: Flashing Red
External control User supplied momentary on/off switch
Operating temperature range -28.9 C to 48.9 C (100 A) -40 C to 85 C (250 A)
Remote panel (optional)
Flush mount, splashproof front, 25

Multiple Battery Bank Charging

PathMaker is a battery combiner that automatically connects 2 or 3 battery banks or simultaneous charging and isolates them during discharge. A toggle switch allows the user to manually parallel battery banks for emergency starting power. For use with 12 or 24-volt systems, PathMaker has user adjustable settings for connect and disconnect.

Product Features

Automatic, high current switch for simultaneous two to three bank charging
Connects batteries together when the voltage is sufficiently high and disconnects when voltage drops during discharge
No voltage drop in charging voltage
Manual connect feature for emergency starts
Compatible with all charging sources
Convenient front panel LED status indicators
User-selectable connect and disconnect voltages
One year warranty
Options

Four models available
Available in two or three battery bank versions with models at 100 and 250 Amps
Optional Remote Control - indicates Off, Auto and Combine

Specifications


Current ratings 100 A: 100 A continuous, 400 A peak 250 A: 250 A continuous, 1200 A peak
Voltage range 7-33 V (24 V assumed if > 18.0 V)
Low voltage disconnect range 12.8-13.2 V (x2 for 24 V)
Connect voltage range 13.1-13.5 V (x2 for 24 V)
High voltage disconnect range 14-16 V (x2 for 24V)
Idle power consumed 0.2-0.35 W at 12 V, 0.4-0.7 W at 24 V
Connected power
100 A/2 Bank 5.4 W @ 12 V, 5.8 W @ 24 V
100 A/3 Bank 10.4 W @ 12 V, 10.8 W @ 24 V
250 A/3 Bank 3.46 W @ 12 V, 5.43 W @ 24 V
250 A/2 Bank 2.24 W @ 12 V, 3.69 W @ 24 V
Indicator lights Disabled: Yellow Connected: Green High Voltage Disconnect: Red Wait for Reconnect: Flashing Red
External control User supplied momentary on/off sw switch
Operating temperature range -28.9 C to 48.9 C (100 A) -40 C to 85 C (250 A)
Remote panel (optional)
Flush mount, splashproof front,

• Altimeter: Digital
• Barometer: Digital
• Timer: Yes
• Chronograph: Yes
• Thermometer: Digital
• Digital Compass: No
• Declination Adjustable:
• Buoyant: No
• Bubble Level: No
• Backlight: Yes
• Low Battery Indicator: No
• PC Compatible: No
• Waterproof: Water resistant to 50m
• Backlight / Electroluminescent: Backlight
• Alarms: 2 Daily plus hour chime
• Battery Type: Watch battery
• Battery Life:
• Size: For large wrists
• Weight: 1.7oz
• Recommended Use: Navigation and skiing
• Warranty: 2 Years

• Altimeter: Digital
• Barometer: Digital
• Timer: Yes
• Chronograph: Yes
• Thermometer: Digital
• Digital Compass: No
• Declination Adjustable:
• Buoyant: No
• Bubble Level: No
• Backlight: Yes
• Low Battery Indicator: No
• PC Compatible: No
• Waterproof: Water resistant to 50m
• Backlight / Electroluminescent: Backlight
• Alarms: 2 Daily plus hour chime
• Battery Type: Watch battery
• Battery Life:
• Size: For large wrists
• Weight: 1.7oz (48oz)
• Recommended Use: Navigation, alpine climbing, skiing
• Manufacturer Warranty: 2 Years

• Altimeter: Digital
• Barometer: Digital
• Timer: Yes
• Chronograph: Yes
• Thermometer: Digital
• Digital Compass: No
• Declination Adjustable:
• Buoyant: No
• Bubble Level: No
• Backlight: Yes
• Low Battery Indicator: No
• PC Compatible: No
• Waterproof: Water resistant to 50m
• Backlight / Electroluminescent: Backlight
• Alarms: 2 Daily plus hour chime
• Battery Type: Watch battery
• Battery Life:
• Size: For large wrists
• Weight: 1.7oz
• Recommended Use: Navigation and skiing
• Warranty: 2 Years

• Altimeter: Yes
• Barometer: Yes
• Timer: Yes
• Chronograph: Yes
• Thermometer: Yes
• Digital Compass: Yes
• Declination Adjustable: Yes
• Buoyant:
• Bubble Level:
• Low Battery Indicator: Yes
• PC Compatible: No
• Waterproof: No, water resistant 50m
• Backlight/ Electroluminescent: Yes
• Alarms: Yes
• Battery Type:
• Battery Life:
• Size:
• Weight: 2oz
• Recommended Use: Tracking progress in the mountains
• Warranty

• Altimeter: Yes
• Barometer: Yes
• Timer: Yes
• Chronograph: Yes
• Thermometer: Yes
• Digital Compass: Yes
• Declination Adjustable: Yes
• Buoyant:
• Bubble Level:
• Low Battery Indicator: Yes
• PC Compatible: No
• Waterproof: No, water resistant 50m
• Backlight/ Electroluminescent: Yes
• Alarms: Yes
• Battery Type:
• Battery Life:
• Size:
• Weight: 2oz
• Recommended Use: Tracking progress in the mountains
• Warranty

• Material:
• Band Type:
• Altimeter: Yes
• Barometer: Yes
• Compass: Yes
• Stopwatch: Yes
• Chronograph: Yes
• Thermometer: Yes
• Heart Rate Monitor: No
• PC Compatible:
• Waterproof: Yes, 30m
• Backlight/ Electroluminescent: Yes
• Alarms: Yes
• Size:
• Recommended Use: Skiing , climbing, training
• Weight: 2.5oz (71g)
• Warranty:

• Material: [Housing] Stainless steel; [Strap] rubber
• Altimeter: Yes, usable to 29520ft (9000m)
• Barometer: Yes
• Heart Rate Monitor: No
• Chronograph: Yes
• Thermometer: Yes
• Digital Compass: Yes
• Adjustable Declination: Yes
• Low Battery Indicator: Yes
• PC Compatible: No
• Waterproof: Water-resistant to 165ft (50m)
• Backlight: Yes
• Alarms: 2 Time, 1 altimeter
• Battery Type: User-replaceable
• Battery Life: Not specified
• Size: Large
• Weight: Not specified
• Recommended Use: Climbing, mountaineering, skiing
• Manufacturer Warranty: 1 Year

• Material: [Housing] Titanium; [Strap] rubber
• Altimeter: Yes, usable to 29,520ft (9000m)
• Barometer: Yes
• Heart Rate Monitor: No
• Chronograph: Yes
• Thermometer: Yes
• Digital Compass: Yes
• Adjustable Declination: Yes
• Low Battery Indicator: No
• PC Compatible: No
• Waterproof: Water resistant to 165ft (50m)
• Backlight: Yes
• Alarms: 2 Time, 1 altimeter
• Battery Type: Consumer replaceable
• Battery Life:
• Size: Medium
• Weight:
• Recommended Use: Mountaineering, skiing, trekking
• Manufacturer Warranty: 1 Year

• Altimeter: Digital
• Barometer: Digital
• Timer: Yes
• Chronograph: Yes
• Thermometer: Digital
• Digital Compass: Yes
• Declination Adjustable: Yes
• Buoyant: No
• Bubble Level: Yes
• Backlight: Yes
• Low Battery Indicator: No
• PC Compatible: No
• Waterproof: Water resistant to 10m Backlight/Electroluminescent:
• Alarms: Two daily and one hourly chime
• Battery Type: Watch battery
• Battery Life:
• Size: 4.5 x 2.23 x .75in (11.4 x 5.7 x 1.9cm)
• Weight: 2oz (57g)
• Recommended Use: Navigation Warranty: 2 Years

• Altimeter: Digital
• Barometer: Digital
• Timer: Yes
• Chronograph: Yes
• Thermometer: Digital
• Digital Compass: Yes
• Declination Adjustable: Yes
• Buoyant: No
• Bubble Level: Yes
• Backlight: Yes
• Low Battery Indicator: No
• PC Compatible: No
• Waterproof: Water resistant to 10m Backlight/Electroluminescent:
• Alarms: Two daily and one hourly chime
• Battery Type: Watch battery
• Battery Life:
• Size: 4.5 x 2.23 x .75in (11.4 x 5.7 x 1.9cm)
• Weight: 2oz (57g)
• Recommended Use: Navigation Warranty: 2 Years